{"product_id":"autopilot-ppc3-replacement-salt-cell-with-unions","title":"AutoPilot PPC3 Replacement Salt Cell with Unions — Replaces RC-42","description":"\u003cp\u003eThe \u003cstrong\u003eAutoPilot PPC3 Replacement Salt Cell\u003c\/strong\u003e is the genuine OEM cell for AutoPilot chlorine generators, supplied \u003cstrong\u003ewith unions included\u003c\/strong\u003e so it plumbs straight in. It is the current replacement for the superseded \u003cstrong\u003eRC-42\u003c\/strong\u003e cell.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine AutoPilot OEM cell:\u003c\/strong\u003e correct plate count and spacing for AutoPilot control units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect RC-42 replacement:\u003c\/strong\u003e the current part number for that superseded cell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnions included:\u003c\/strong\u003e installation is quick and requires no additional fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-range capacity:\u003c\/strong\u003e sits between the PPC1 and PPC4 in the AutoPilot cell range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium plates:\u003c\/strong\u003e built for continuous immersion in salt water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e PPC3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Replacement salt chlorine generator cell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnions:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces:\u003c\/strong\u003e RC-42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e AutoPilot chlorine generator systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AutoPilot (AquaCal AutoPilot Inc)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes this replace an RC-42?\u003c\/h3\u003e\n\u003cp\u003eYes. The PPC3 is the current replacement for the RC-42 cell, and ships with unions.\u003c\/p\u003e\n\u003ch3\u003eWhich cell do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the cell to your pool volume and your existing AutoPilot control unit. The \u003cstrong\u003ePPC1\u003c\/strong\u003e covers pools to 28,000 gallons and the \u003cstrong\u003ePPC4\u003c\/strong\u003e replaces the RC-52. Fitting an undersized cell means it runs constantly and wears out early.\u003c\/p\u003e\n\u003ch3\u003eShould I replace the cord at the same time?\u003c\/h3\u003e\n\u003cp\u003eAutoPilot recommends fitting a new cell cord when you replace the cell. Reusing a worn cord can void warranty coverage on the new cell, and cord failure is a common cause of what looks like cell failure.\u003c\/p\u003e\n\u003ch3\u003eHow long does a salt cell last?\u003c\/h3\u003e\n\u003cp\u003eTypically three to five years depending on run hours, water chemistry and how well calcium scaling is managed.\u003c\/p\u003e\n\u003ch3\u003eWhy is my cell producing less chlorine?\u003c\/h3\u003e\n\u003cp\u003eUsually scale build-up on the plates, low salt level, cold water, or a cell reaching end of life. Inspect and clean the plates before concluding the cell has failed.\u003c\/p\u003e\n\u003ch3\u003eWho should install it?\u003c\/h3\u003e\n\u003cp\u003eA qualified pool professional or a competent owner. The system must be isolated and depressurised before the cell is removed.\u003c\/p\u003e\n\u003cdiv class=\"ps4u-faq\"\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the part number for this salt cell?\u003c\/h3\u003e\n\u003cp\u003eAutoPilot lists this cell under part number PPC3. Quote PPC3 when you cross-reference against your equipment manual, an existing cell, or a parts diagram, so you are comparing the same revision.\u003c\/p\u003e\n\u003ch3\u003eHow do I confirm this fits my system?\u003c\/h3\u003e\n\u003cp\u003eMatch the part number stamped on the cell you are replacing, or look it up in the parts list for your AutoPilot equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.\u003c\/p\u003e\n\u003ch3\u003eHow do I keep a salt cell working well?\u003c\/h3\u003e\n\u003cp\u003eKeep salt level and pH within the range your manual specifies, and inspect the plates for calcium scale each season. Scale insulates the plates and cuts chlorine output long before the cell is genuinely worn out.\u003c\/p\u003e\n\u003ch3\u003eDo I need to add salt after fitting a new cell?\u003c\/h3\u003e\n\u003cp\u003eNot because of the cell itself, but test and correct salt level before you start the new cell. Running a cell at low salt shortens its life.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty on this salt cell?\u003c\/h3\u003e\n\u003cp\u003eIt carries the standard AutoPilot manufacturer warranty. The terms are set by the manufacturer, and fitting a new cell cord at the same time helps protect coverage. Keep the receipt and packaging until you have confirmed correct operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003csmall\u003eCalifornia Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/small\u003e\u003c\/p\u003e","brand":"AutoPilot","offers":[{"title":"Default Title","offer_id":53100122341693,"sku":"PPC3","price":635.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/6741\/8429\/files\/AUTPPC3_0_2d968059-6a92-4096-9340-eddf397cb41b.jpg?v=1789670723","url":"https:\/\/poolsupply4u.com\/products\/autopilot-ppc3-replacement-salt-cell-with-unions","provider":"PoolSupply 4U","version":"1.0","type":"link"}