{"product_id":"jandy-levolor-ii-k2300ckc-dual-fill-electronic-water-leveler-2-sensors-100-ft-2-x-1-valves-110-220v-genuine-oem","title":"Jandy Levolor II K2300CKC Dual-Fill Electronic Water Leveler — 2 Sensors 100 ft \u0026 2 x 1\" Valves, 110\/220V — Genuine OEM","description":"\u003cp\u003eThe \u003cstrong\u003eJandy Levolor II K2300CKC\u003c\/strong\u003e is a genuine OEM \u003cstrong\u003edual-fill\u003c\/strong\u003e electronic water leveling system. It maintains the level in \u003cstrong\u003etwo separate bodies of water\u003c\/strong\u003e — typically a pool and spa running on independent equipment — using two sensors and two solenoid valves from a single controller. When a sensor detects low water for roughly two minutes, the controller opens that circuit's valve and fills until the level is restored.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo independent fill circuits:\u003c\/strong\u003e Each body of water gets its own sensor and valve, controlled separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo moving parts:\u003c\/strong\u003e Solid-state sensing means nothing to wear out or rust, unlike a mechanical float valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWave compensation:\u003c\/strong\u003e Electronics ignore surface movement and splash, so the system fills only on a genuine low-water condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime-out lock-out:\u003c\/strong\u003e Limits how long water can flow, guarding against overfilling and helping expose a hidden leak rather than masking it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual voltage:\u003c\/strong\u003e Wired 220V at the factory, field-adjustable to 110V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive LED indicators:\u003c\/strong\u003e Power, Sensor I, Filling I, Sensor II and Filling II.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible placement:\u003c\/strong\u003e Sensors mount anywhere a constant level can be measured — skimmer or static pipe. No in-deck canisters or under-deck pressurised fill lines needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof enclosure:\u003c\/strong\u003e Suited to equipment pads and mechanical rooms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e K2300CKC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual-fill electronic water leveler (two bodies of water)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220V factory wired, field-adjustable to 110V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Cord:\u003c\/strong\u003e 100 ft (two sensors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValves:\u003c\/strong\u003e Two 24 VAC 1\" solenoid valves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Contains:\u003c\/strong\u003e Control box, two sensors (100 ft), two 1\" solenoid valves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicators:\u003c\/strong\u003e 5 LEDs — Power, Sensor I, Filling I, Sensor II, Filling II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListing:\u003c\/strong\u003e ETL approved\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 052337029315\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jandy \/ Zodiac (Genuine OEM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow is this different from the K1100?\u003c\/h3\u003e\n\u003cp\u003eThe K2300 fills \u003cstrong\u003etwo\u003c\/strong\u003e separate bodies of water with two sensors and two valves. The K1100 fills \u003cstrong\u003eone\u003c\/strong\u003e, with a single sensor and valve. Choose the K2300 only if your pool and spa have independent equipment sets and both need levelling.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need this if my spa spills over into the pool?\u003c\/h3\u003e\n\u003cp\u003eUsually not. A shared-water pool and spa behaves as one body and only needs a single-fill K1100. The K2300 is for genuinely separate bodies.\u003c\/p\u003e\n\n\u003ch3\u003eWill it overfill if the water is choppy?\u003c\/h3\u003e\n\u003cp\u003eNo. The electronics compensate for waves and splash-out, and a lock-out timer caps fill duration on each circuit.\u003c\/p\u003e\n\n\u003ch3\u003eCan I run it on 110V?\u003c\/h3\u003e\n\u003cp\u003eYes. It ships wired for 220V and is field-adjustable to 110V per the installation manual.\u003c\/p\u003e\n\n\u003ch3\u003eWho should install it?\u003c\/h3\u003e\n\u003cp\u003eA qualified pool professional or licensed electrician. The control box must be mounted at least five feet from the inside pool wall using non-metallic plumbing — three metres for Canadian installations.\u003c\/p\u003e\n\n\u003ch3\u003eAre both valves 1 inch?\u003c\/h3\u003e\n\u003cp\u003eYes — this configuration ships with two 1\" solenoid valves and two 100 ft sensors.\u003c\/p\u003e\n\u003cdiv class=\"ps4u-faq\"\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs this an original manufacturer part?\u003c\/h3\u003e\n\u003cp\u003eThis item is listed under the manufacturer's own part number. Using the manufacturer's part keeps fit and material specification consistent with what the equipment was designed around.\u003c\/p\u003e\n\u003ch3\u003eWhat is the part number for this part?\u003c\/h3\u003e\n\u003cp\u003eJandy lists this part under part number K2300CKC. Quote K2300CKC when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.\u003c\/p\u003e\n\u003ch3\u003eWhat should I check before ordering?\u003c\/h3\u003e\n\u003cp\u003eCompare the part number and the dimensions in the specification section against the item you are replacing. If your equipment model is not named on this page, send it to us and we will confirm the fit before you buy.\u003c\/p\u003e\n\u003ch3\u003eHow do I confirm this fits my equipment?\u003c\/h3\u003e\n\u003cp\u003eMatch the part number stamped on the component you are replacing, or look it up in the parts list for your Jandy equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.\u003c\/p\u003e\n\u003ch3\u003eHow is this item packaged and shipped?\u003c\/h3\u003e\n\u003cp\u003eOrders ship from our warehouse. Transit time depends on the destination and the size of the item; current shipping and return terms are on our Shipping and Returns page.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty on this part?\u003c\/h3\u003e\n\u003cp\u003eIt carries the standard Jandy manufacturer warranty. The terms are set by Jandy, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":52905880322365,"sku":"K2300CKC","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/6741\/8429\/files\/K2300CKC-5-1_c7137fa8-e0db-4bef-aa48-bcd8ca56e149.jpg?v=1787255037","url":"https:\/\/poolsupply4u.com\/products\/jandy-levolor-ii-k2300ckc-dual-fill-electronic-water-leveler-2-sensors-100-ft-2-x-1-valves-110-220v-genuine-oem","provider":"PoolSupply 4U","version":"1.0","type":"link"}