{"product_id":"pentair-sta-rite-013067-intellipro3-vsf-1-5-thp-touchscreen","title":"Pentair Sta-Rite 013067 IntelliPro3 VSF Pool Pump — 1.5 THP Variable Speed with Touchscreen, 115\/208-230V — Genuine OEM","description":"\u003cp\u003eThe \u003cstrong\u003eSta-Rite 013067 IntelliPro3 VSF\u003c\/strong\u003e is the 1.5 THP variable speed and flow pool pump \u003cstrong\u003ewith the colour touchscreen built in\u003c\/strong\u003e. Speeds, schedules and flow targets are set right on the pump at the equipment pad, and the same pump is reachable from the Pentair Home app over WiFi.\u003c\/p\u003e\n\u003ch2\u003eWhich IntelliPro3 Do I Need?\u003c\/h2\u003e\n\u003cp\u003eAll four 1.5 HP IntelliPro3 pumps are the \u003cstrong\u003esame pump hydraulically and electrically\u003c\/strong\u003e. The only difference is which control hardware is factory-fitted:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e013065\u003c\/strong\u003e — base, no touchscreen, no relay board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e013066\u003c\/strong\u003e — I\/O relay board only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e013067 (this one)\u003c\/strong\u003e — \u003cstrong\u003etouchscreen\u003c\/strong\u003e, no relay board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e013068\u003c\/strong\u003e — touchscreen \u003cstrong\u003eand\u003c\/strong\u003e I\/O relay board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe I\/O board adds two onboard relays so the pump itself can switch a pool light or salt cell. \u003cstrong\u003eIf you already run IntelliCenter or EasyTouch, you do not need it\u003c\/strong\u003e — your automation already does that job, and 013067 is the right choice. If you have no automation panel and want the pump to control a light or salt cell directly, choose 013068 instead.\u003c\/p\u003e\n\u003cp\u003eAlready bought this one and want the relays later? The \u003cstrong\u003e356365Z\u003c\/strong\u003e relay control board kit is the field-installable upgrade.\u003c\/p\u003e\n\u003ch2\u003e⚠️ This Pump Is Not Equipped with SVRS\u003c\/h2\u003e\n\u003cp\u003ePentair's installation guide states plainly that this pump \u003cem\u003e\"is not equipped with Safety Vacuum Release System (SVRS) protection and does not protect against body or limb entrapments.\"\u003c\/em\u003e If your installation requires SVRS, you need a different pump or an approved SVRS device.\u003c\/p\u003e\n\u003ch2\u003eEfficiency\u003c\/h2\u003e\n\u003cp\u003eRated \u003cstrong\u003eWEF 9.4\u003c\/strong\u003e against a DOE minimum of 6.84 — roughly 37 percent better than the federal floor — and ENERGY STAR certified. Being a true variable speed pump, it also satisfies California's variable speed requirement for pool pump replacements. Running at low speed for longer is where the savings come from: at 1634 RPM it moves 31 GPM on about 124 watts.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour touchscreen on the pump:\u003c\/strong\u003e set speeds and schedules at the pad, no laptop or panel needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 to 4000 RPM, 20 to 90 GPM:\u003c\/strong\u003e true variable speed with flow control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual voltage:\u003c\/strong\u003e wires for 115V or 208-230V single phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnected:\u003c\/strong\u003e WiFi, Bluetooth and the Pentair Home app, plus RS-485 for IntelliCenter and EasyTouch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECM permanent magnet motor:\u003c\/strong\u003e quieter and far more efficient than an induction motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 1.5 in or 2 in plumbing:\u003c\/strong\u003e the reducer bushing ships in the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 013067\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e IntelliPro3 VSF, Sta-Rite black cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Hardware:\u003c\/strong\u003e Touchscreen HMI, no I\/O relay board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Horsepower:\u003c\/strong\u003e 1.5 THP (0.896 hydraulic HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 115 \/ 208-230 VAC, 50\/60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 12.0 A at 115V, 6.4-5.9 A at 208-230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Input Power:\u003c\/strong\u003e 1350 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Range:\u003c\/strong\u003e 20-90 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed Range:\u003c\/strong\u003e 400-4000 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Head:\u003c\/strong\u003e approximately 70 ft of water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlumbing:\u003c\/strong\u003e 1.5 in or 2 in, reducer bushing included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e electronically commutated permanent magnet (ECM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Factor:\u003c\/strong\u003e WEF 9.4 kgal\/kWh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Weight:\u003c\/strong\u003e 48 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA Type 3 \/ IPX5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL 1081, NSF\/ANSI\/CAN 50, ENERGY STAR certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlmond IntelliFlo3 Equivalent:\u003c\/strong\u003e 011067\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Drive:\u003c\/strong\u003e 356162Z\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation Requirements\u003c\/h2\u003e\n\u003cp\u003ePentair requires installation by a \u003cstrong\u003elicensed or certified electrician\u003c\/strong\u003e, with GFCI protection. Bonding needs a solid copper conductor no smaller than 8 AWG (6 AWG or larger in Canada). Note the voltage difference when sizing the circuit: at 115V the pump draws 12.0 A, at 208-230V only 6.4-5.9 A.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between 013067 and 013068?\u003c\/h3\u003e\n\u003cp\u003eOnly the I\/O relay board. Both have the touchscreen. 013068 adds two onboard relays (5 A and 16 A) so the pump can switch a pool light, salt cell or booster pump directly. If you have an automation panel already, 013067 is the one you want.\u003c\/p\u003e\n\u003ch3\u003eIs this the same as the IntelliFlo3 011067?\u003c\/h3\u003e\n\u003cp\u003eMechanically yes. IntelliPro3 is the Sta-Rite-branded black cabinet sold through the trade channel; IntelliFlo3 is the Pentair-branded almond version. Same pump, same WEF 9.4, different colour and channel.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with IntelliCenter or EasyTouch?\u003c\/h3\u003e\n\u003cp\u003eYes. RS-485 is built in, so it connects to Pentair automation the same way the IntelliFlo3 does.\u003c\/p\u003e\n\u003ch3\u003eCan I run it on 115V?\u003c\/h3\u003e\n\u003cp\u003eYes, it is dual voltage. Be aware it draws 12.0 A at 115V versus 6.4-5.9 A at 208-230V, so a 115V installation needs meaningfully more circuit capacity. Your electrician should size accordingly.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the strainer pot?\u003c\/h3\u003e\n\u003cp\u003eYes. This is a complete pump, not a drive or motor only. The strainer pot and basket are part of it.\u003c\/p\u003e\n\u003ch3\u003eDo I need 2 inch plumbing?\u003c\/h3\u003e\n\u003cp\u003eNo. It ships configured for 2 in with a reducer bushing included for 1.5 in, so either works without buying adapters.\u003c\/p\u003e\n\u003ch3\u003eIs there a variable speed law that requires this?\u003c\/h3\u003e\n\u003cp\u003eFederal DOE efficiency standards for pool pumps have been in force since July 2021, and California requires variable speed for pool pump replacement motors of 0.5 HP and above. This pump is DOE compliant at WEF 9.4 and ENERGY STAR certified.\u003c\/p\u003e\n\u003cdiv class=\"ps4u-faq\"\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the part number for this pump?\u003c\/h3\u003e\n\u003cp\u003ePentair lists this pump under part number 013067. Quote 013067 when you cross-reference it against your equipment manual, an existing pump, or a parts diagram, so you are comparing the same configuration.\u003c\/p\u003e\n\u003ch3\u003eHow do I confirm this fits my equipment?\u003c\/h3\u003e\n\u003cp\u003eCheck your plumbing size, available voltage and circuit capacity, and whether you need the onboard relay board. If you are unsure which of the four IntelliPro3 variants suits your pad, send us your setup before ordering and we will confirm.\u003c\/p\u003e\n\u003ch3\u003eDoes pool pump work need an electrician?\u003c\/h3\u003e\n\u003cp\u003eYes. Pool equipment sits under specific electrical code requirements covering bonding, grounding and GFCI protection. Cut power at the breaker before any work, and have a licensed professional handle the supply side and bonding.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty on this pump?\u003c\/h3\u003e\n\u003cp\u003eThis is a Pentair TradeGrade product. Pentair states that TradeGrade products are intended to be exclusive to retail stores, pool builders or pool service companies, and that a product purchased online receives a sixty day limited warranty. It is not eligible for the three-year bundle warranty. Review Pentair's current terms before purchasing and keep your receipt and packaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003csmall\u003eCalifornia Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/small\u003e\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":67617802027325,"sku":"013067","price":1509.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/6741\/8429\/files\/IntelliPro3_cc1baadf-8ff2-4a6b-b5b8-09ec10e1b4e1.jpg?v=1790964202","url":"https:\/\/poolsupply4u.com\/products\/pentair-sta-rite-013067-intellipro3-vsf-1-5-thp-touchscreen","provider":"PoolSupply 4U","version":"1.0","type":"link"}