{"product_id":"pentair-sta-rite-013068-intellipro3-vsf-touchscreen-io-board","title":"Pentair Sta-Rite 013068 IntelliPro3 VSF Pool Pump — 1.5 THP Variable Speed with Touchscreen and I\/O Relay Board, 115\/208-230V — Genuine OEM","description":"\u003cp\u003eThe \u003cstrong\u003eSta-Rite 013068 IntelliPro3 VSF\u003c\/strong\u003e is the fully-loaded 1.5 THP variable speed and flow pool pump: \u003cstrong\u003ecolour touchscreen and the I\/O relay control board\u003c\/strong\u003e, both factory-installed. The relays let the pump switch a pool light or salt cell on its own, so a simple pad does not need a separate automation panel.\u003c\/p\u003e\n\u003ch2\u003eWhat the I\/O Relay Board Actually Does\u003c\/h2\u003e\n\u003cp\u003eIt adds two high-voltage terminals on the pump itself:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay 1\u003c\/strong\u003e — 5 A maximum, selectable for Lights, Salt Cell or Other\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay 2\u003c\/strong\u003e — 16 A maximum, selectable for Lights, Salt Cell, Booster Pump or Other\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIf you already run IntelliCenter or EasyTouch, you probably do not need this board\u003c\/strong\u003e — your automation panel already switches those loads, and the cheaper \u003cstrong\u003e013067\u003c\/strong\u003e is the same pump with just the touchscreen. The I\/O board earns its keep on pads with no automation panel.\u003c\/p\u003e\n\u003ch2\u003eWhich IntelliPro3 Do I Need?\u003c\/h2\u003e\n\u003cp\u003eAll four 1.5 HP IntelliPro3 pumps are the \u003cstrong\u003esame pump hydraulically and electrically\u003c\/strong\u003e. Only the control hardware differs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e013065\u003c\/strong\u003e — base, no touchscreen, no relay board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e013066\u003c\/strong\u003e — I\/O relay board only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e013067\u003c\/strong\u003e — touchscreen only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e013068 (this one)\u003c\/strong\u003e — \u003cstrong\u003etouchscreen and I\/O relay board\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e⚠️ This Pump Is Not Equipped with SVRS\u003c\/h2\u003e\n\u003cp\u003ePentair's installation guide states plainly that this pump \u003cem\u003e\"is not equipped with Safety Vacuum Release System (SVRS) protection and does not protect against body or limb entrapments.\"\u003c\/em\u003e If your installation requires SVRS, you need a different pump or an approved SVRS device.\u003c\/p\u003e\n\u003ch2\u003eEfficiency\u003c\/h2\u003e\n\u003cp\u003eRated \u003cstrong\u003eWEF 9.4\u003c\/strong\u003e against a DOE minimum of 6.84 — roughly 37 percent better than the federal floor — and ENERGY STAR certified. Being a true variable speed pump, it also satisfies California's variable speed requirement for pool pump replacements. At 1634 RPM it moves 31 GPM on about 124 watts, which is where the running-cost savings come from.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouchscreen and onboard relays:\u003c\/strong\u003e the most complete configuration in the 1.5 HP range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitches a light or salt cell directly:\u003c\/strong\u003e two relays rated 5 A and 16 A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 to 4000 RPM, 20 to 90 GPM:\u003c\/strong\u003e true variable speed with flow control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual voltage:\u003c\/strong\u003e wires for 115V or 208-230V single phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnected:\u003c\/strong\u003e WiFi, Bluetooth and the Pentair Home app, plus RS-485 for IntelliCenter and EasyTouch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 1.5 in or 2 in plumbing:\u003c\/strong\u003e the reducer bushing ships in the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 013068\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e IntelliPro3 VSF, Sta-Rite black cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Hardware:\u003c\/strong\u003e Touchscreen HMI and I\/O relay control board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay Ratings:\u003c\/strong\u003e 5 A and 16 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Horsepower:\u003c\/strong\u003e 1.5 THP (0.896 hydraulic HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 115 \/ 208-230 VAC, 50\/60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 12.0 A at 115V, 6.4-5.9 A at 208-230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Input Power:\u003c\/strong\u003e 1350 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Range:\u003c\/strong\u003e 20-90 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed Range:\u003c\/strong\u003e 400-4000 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Head:\u003c\/strong\u003e approximately 70 ft of water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlumbing:\u003c\/strong\u003e 1.5 in or 2 in, reducer bushing included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e electronically commutated permanent magnet (ECM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Factor:\u003c\/strong\u003e WEF 9.4 kgal\/kWh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Weight:\u003c\/strong\u003e 48 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA Type 3 \/ IPX5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL 1081, NSF\/ANSI\/CAN 50, ENERGY STAR certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlmond IntelliFlo3 Equivalent:\u003c\/strong\u003e 011068\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Drive:\u003c\/strong\u003e 356162Z\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation Requirements\u003c\/h2\u003e\n\u003cp\u003ePentair requires installation by a \u003cstrong\u003elicensed or certified electrician\u003c\/strong\u003e, with GFCI protection. Bonding needs a solid copper conductor no smaller than 8 AWG (6 AWG or larger in Canada). Note the voltage difference when sizing the circuit: at 115V the pump draws 12.0 A, at 208-230V only 6.4-5.9 A. The relay terminals carry high voltage and must be wired by the same qualified professional.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between 013068 and 013067?\u003c\/h3\u003e\n\u003cp\u003eOnly the I\/O relay board. Both have the touchscreen and both are the same pump otherwise. 013068 adds two onboard relays so it can switch a pool light, salt cell or booster pump directly. If you already have an automation panel, 013067 saves you money for the same pump performance.\u003c\/p\u003e\n\u003ch3\u003eDo I still need an automation system?\u003c\/h3\u003e\n\u003cp\u003eFor a simple pool with a light and a salt cell, often not — that is exactly what the two relays cover. For heaters, multiple valve actuators, spa control or more circuits, you still want IntelliCenter or EasyTouch, and the pump connects to either over RS-485.\u003c\/p\u003e\n\u003ch3\u003eIs this the same as the IntelliFlo3 011068?\u003c\/h3\u003e\n\u003cp\u003eMechanically yes. IntelliPro3 is the Sta-Rite-branded black cabinet sold through the trade channel; IntelliFlo3 is the Pentair-branded almond version. Same pump, same WEF 9.4, different colour and channel.\u003c\/p\u003e\n\u003ch3\u003eCan I run it on 115V?\u003c\/h3\u003e\n\u003cp\u003eYes, it is dual voltage. It draws 12.0 A at 115V versus 6.4-5.9 A at 208-230V, so a 115V installation needs meaningfully more circuit capacity. Your electrician should size accordingly.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the strainer pot?\u003c\/h3\u003e\n\u003cp\u003eYes. This is a complete pump, not a drive or motor only. The strainer pot and basket are part of it.\u003c\/p\u003e\n\u003ch3\u003eDo I need 2 inch plumbing?\u003c\/h3\u003e\n\u003cp\u003eNo. It ships configured for 2 in with a reducer bushing included for 1.5 in, so either works without buying adapters.\u003c\/p\u003e\n\u003ch3\u003eWhat can I plug into the relays?\u003c\/h3\u003e\n\u003cp\u003eRelay 1 is rated 5 A and relay 2 is rated 16 A. Typical uses are a pool light on one and a salt chlorine generator or booster pump on the other. Check the load rating of your device against those figures before wiring.\u003c\/p\u003e\n\u003cdiv class=\"ps4u-faq\"\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the part number for this pump?\u003c\/h3\u003e\n\u003cp\u003ePentair lists this pump under part number 013068. Quote 013068 when you cross-reference it against your equipment manual, an existing pump, or a parts diagram, so you are comparing the same configuration.\u003c\/p\u003e\n\u003ch3\u003eHow do I confirm this fits my equipment?\u003c\/h3\u003e\n\u003cp\u003eCheck your plumbing size, available voltage and circuit capacity, and whether you actually need the onboard relay board. If you are unsure which of the four IntelliPro3 variants suits your pad, send us your setup before ordering and we will confirm.\u003c\/p\u003e\n\u003ch3\u003eDoes pool pump work need an electrician?\u003c\/h3\u003e\n\u003cp\u003eYes. Pool equipment sits under specific electrical code requirements covering bonding, grounding and GFCI protection, and the relay terminals on this model carry high voltage. Cut power at the breaker before any work, and have a licensed professional handle the supply side and bonding.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty on this pump?\u003c\/h3\u003e\n\u003cp\u003eThis is a Pentair TradeGrade product. Pentair states that TradeGrade products are intended to be exclusive to retail stores, pool builders or pool service companies, and that a product purchased online receives a sixty day limited warranty. It is not eligible for the three-year bundle warranty. Review Pentair's current terms before purchasing and keep your receipt and packaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003csmall\u003eCalifornia Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/small\u003e\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":67617804190013,"sku":"013068","price":1619.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/6741\/8429\/files\/pentair-15hp-sta-rite-intellipro3-variable-speed-flow-pump-io-relay-touchscreen-013068-vita-pool-supply-4982704.png?v=1790964212","url":"https:\/\/poolsupply4u.com\/products\/pentair-sta-rite-013068-intellipro3-vsf-touchscreen-io-board","provider":"PoolSupply 4U","version":"1.0","type":"link"}