{"product_id":"sta-rite-023035-max-e-proxf-vs-commercial-variable-speed-pump-5hp","title":"Sta-Rite 023035 Max-E-ProXF VS Commercial Variable Speed Pool Pump — 5 HP, Single or Three Phase, NSF\/ANSI 50 — Genuine OEM","description":"\u003cp\u003eThe \u003cstrong\u003eSta-Rite 023035 Max-E-ProXF VS\u003c\/strong\u003e is a 5 HP self-priming commercial variable speed pool pump. The motor and variable frequency drive are a single integrated assembly with an onboard keypad, so there is no separate drive enclosure to mount or wire. It is built for continuous duty on apartment, hotel, HMAC and large residential circulation systems.\u003c\/p\u003e\n\u003ch2\u003e⚠️ Not Interchangeable with the WhisperFloXF VS (022035)\u003c\/h2\u003e\n\u003cp\u003eThese two pumps look alike, share a drive platform, carry the same 5 HP rating and sit within a couple of hundred dollars of each other — and they are \u003cstrong\u003enot\u003c\/strong\u003e substitutes. Pentair assigns them different parts almost all the way down:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet end assembly:\u003c\/strong\u003e 401000 here, 400000 on the WhisperFloXF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVS drive kit:\u003c\/strong\u003e 358086 here, 358085 on the WhisperFloXF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal plate, motor base, strainer lid and drain plug\u003c\/strong\u003e also differ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are replacing an existing pump, \u003cstrong\u003ematch the pump body you already have, not the horsepower\u003c\/strong\u003e. A Max-E-ProXF body takes 023035. A WhisperFloXF body takes 022035.\u003c\/p\u003e\n\u003ch2\u003eOne Part Number Covers Every Voltage\u003c\/h2\u003e\n\u003cp\u003eThere is no separate single-phase or three-phase SKU and no field conversion kit. The same pump wires for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle phase:\u003c\/strong\u003e 208-230 V at 20-21 A, or 277-460 V at 17-11 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree phase:\u003c\/strong\u003e 208-460 V at 13-6 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThree phase roughly halves the current draw, which matters on a commercial pad feeding several pumps. A site with no three-phase service can still run it single phase, but it needs a dedicated circuit sized for 20-21 A plus NEC derating.\u003c\/p\u003e\n\u003ch2\u003eNSF\/ANSI 50 Certified\u003c\/h2\u003e\n\u003cp\u003ePentair states this pump \u003cem\u003e\"has been independently tested and Certified to UL 1081, CSA C22.2 No. 108 and NSF\/ANSI 50.\"\u003c\/em\u003e NSF\/ANSI 50 is the listing most state and county health departments require for equipment on a public or commercial pool — it is usually the first thing an inspector asks for, and the main reason to specify this pump over a residential model.\u003c\/p\u003e\n\u003ch2\u003eSpeed Control\u003c\/h2\u003e\n\u003cp\u003eFour programmable speeds anywhere between \u003cstrong\u003e300 and 3450 RPM\u003c\/strong\u003e, shipped preset at 1720, 2500, 3000 and 3450 (Quick Clean). Running long hours at low speed rather than short bursts at full speed is where the energy saving comes from on a commercial circulation load.\u003c\/p\u003e\n\u003ch2\u003eCan I Use It on a Residential Pool?\u003c\/h2\u003e\n\u003cp\u003eYes. Nothing in Pentair's documentation restricts it to commercial installations, and for a very large residential pool it is a legitimate choice. Note that California's Title 20 restriction on pumps of 1 THP and above applies to \u003cstrong\u003esingle speed\u003c\/strong\u003e pumps; because this one is variable speed, that restriction does not bar it. The practical considerations are electrical service and the cost of a commercial-grade pump against a residential one.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne SKU, every voltage:\u003c\/strong\u003e single or three phase without a separate part number.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNSF\/ANSI 50 certified:\u003c\/strong\u003e accepted for public and commercial pool equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300 to 3450 RPM:\u003c\/strong\u003e four programmable speeds with factory presets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax-E-ProXF footprint:\u003c\/strong\u003e the variable speed upgrade for a pad already on single-speed Max-E-ProXF pumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTEFC NEMA 56 frame:\u003c\/strong\u003e totally enclosed fan-cooled, 300-series stainless shaft, double-sealed stainless bearings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 in unions, adaptable to 3 in:\u003c\/strong\u003e suits most commercial plumbing without reworking the pad.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 023035\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Max-E-ProXF VS Commercial Variable Speed Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sta-Rite (Pentair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 5 HP, 5.0 THP, WEF 5.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage, single phase:\u003c\/strong\u003e 208-230 \/ 277-460 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage, three phase:\u003c\/strong\u003e 208-460 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull load amps:\u003c\/strong\u003e 20-21 A single phase at 208-230 V; 13-6 A three phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed Range:\u003c\/strong\u003e 300-3450 RPM, four programmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Presets:\u003c\/strong\u003e 1720, 2500, 3000, 3450 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts:\u003c\/strong\u003e 2.5 in unions, adaptable to 3 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Continuous Pressure:\u003c\/strong\u003e 42 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Water Temperature:\u003c\/strong\u003e 104 F (40 C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Ambient Temperature:\u003c\/strong\u003e 122 F (50 C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e NEMA 56 frame, totally enclosed fan-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL 1081, CSA C22.2 No. 108, NSF\/ANSI 50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 95 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet End Assembly:\u003c\/strong\u003e 401000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVS Drive Kit:\u003c\/strong\u003e 358086\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation Requirements\u003c\/h2\u003e\n\u003cp\u003ePentair's manual is explicit that \u003cem\u003e\"this unit must be connected only to a supply circuit that is protected by a ground-fault circuit-interrupter (GFCI)\"\u003c\/em\u003e and that the pump \u003cem\u003e\"should be installed and serviced only by a qualified pool service professional.\"\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eBonding requires a solid copper conductor no smaller than 8 AWG (6 AWG or larger in Canada). Pentair does not publish a wire or breaker table, directing instead to the National Electrical Code and local codes — circuit sizing is your electrician's call from the full load amps above. One field note worth passing to the installer: the \u003cstrong\u003efactory-installed surge jumper between the bottom screw terminals must stay in place\u003c\/strong\u003e, as it protects the drive components. A commercial installation will also be subject to local health department permitting.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow is this different from the WhisperFloXF VS 022035?\u003c\/h3\u003e\n\u003cp\u003eDifferent pump body. Same horsepower, same drive platform, same voltage options, but a different wet end (401000 versus 400000), drive kit (358086 versus 358085), seal plate, motor base and strainer lid. They are not interchangeable. Match the body you are replacing.\u003c\/p\u003e\n\u003ch3\u003eDo I need three phase power?\u003c\/h3\u003e\n\u003cp\u003eNo. The same pump runs single phase at 208-230 V or 277-460 V. Three phase is an option that cuts current draw from 20-21 A to 13-6 A, which helps on a pad running several pumps, but it is not required.\u003c\/p\u003e\n\u003ch3\u003eWill it pass a health inspection?\u003c\/h3\u003e\n\u003cp\u003eIt is certified to NSF\/ANSI 50, which is the standard most health departments require for public pool equipment. Confirm your specific jurisdiction's requirements, since local rules vary.\u003c\/p\u003e\n\u003ch3\u003eCan I put this on a residential pool?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a commercial-grade pump but nothing restricts it to commercial use, and it is a reasonable choice for a very large residential pool. Being variable speed, it is also unaffected by California's Title 20 restriction on single-speed pumps of 1 THP and above.\u003c\/p\u003e\n\u003ch3\u003eWill it fit where my single-speed Max-E-ProXF sits?\u003c\/h3\u003e\n\u003cp\u003eIt shares the Max-E-ProXF footprint, which is why it is the usual variable speed upgrade for that family. Confirm your plumbing and pad layout before ordering, and have your installer check union alignment.\u003c\/p\u003e\n\u003ch3\u003eWhat flow does it deliver?\u003c\/h3\u003e\n\u003cp\u003ePentair publishes a performance curve rather than a table. Reading the curve, it reaches roughly 260 GPM near 90 ft of total dynamic head at 3450 RPM, and around 140 GPM at 20 ft at 1720 RPM. Ask us for the curve if you need to size against a specific filter and plumbing run.\u003c\/p\u003e\n\u003ch3\u003eIs the pump ENERGY STAR certified?\u003c\/h3\u003e\n\u003cp\u003eNo. ENERGY STAR's pool pump program covers residential pumps, and commercial pumps like this one are outside it. Pentair lists UL 1081, CSA C22.2 No. 108 and NSF\/ANSI 50 for this model.\u003c\/p\u003e\n\u003cdiv class=\"ps4u-faq\"\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the part number for this pump?\u003c\/h3\u003e\n\u003cp\u003ePentair lists this pump under part number 023035. Quote 023035 when you cross-reference it against your equipment manual, an existing pump, or a parts diagram, so you are comparing the same model — the neighbouring 022035 is a different pump.\u003c\/p\u003e\n\u003ch3\u003eHow do I confirm this fits my equipment?\u003c\/h3\u003e\n\u003cp\u003eMatch the pump body you are replacing rather than the horsepower, and check your available voltage, phase and circuit capacity. If you are unsure whether your pad runs a Max-E-ProXF or a WhisperFloXF body, send us a photo of the existing pump before ordering and we will confirm.\u003c\/p\u003e\n\u003ch3\u003eDoes commercial pump work need an electrician?\u003c\/h3\u003e\n\u003cp\u003eYes. This pump requires GFCI protection and bonding to code, draws up to 21 A single phase, and a commercial installation is usually subject to health department permitting. Cut power at the service before any work and have a licensed professional handle the supply side.\u003c\/p\u003e\n\u003ch3\u003eIs there a warranty on this pump?\u003c\/h3\u003e\n\u003cp\u003ePentair publishes a two year warranty on this pump. Separately, Pentair's warranty policy states that products purchased from the internet, including Authorized Pentair Online Resellers, receive a one year parts-only warranty from the date of purchase, and full coverage depends on proof of professional installation. Review Pentair's current terms before purchasing and keep your receipt, packaging and installation paperwork.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003csmall\u003eCalifornia Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/small\u003e\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":67630036648253,"sku":"023035","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/6741\/8429\/files\/max-e-proxf-vs.jpg?v=1791221899","url":"https:\/\/poolsupply4u.com\/products\/sta-rite-023035-max-e-proxf-vs-commercial-variable-speed-pump-5hp","provider":"PoolSupply 4U","version":"1.0","type":"link"}