J&J Electronics 21101 PureWhite LED Spa Light, 120V 100W-Equiv, 100' Cord
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The J&J Electronics 21101 PureWhite® LED Spa Light delivers bright, energy-efficient white illumination for spas as a complete wet-niche fixture. This is the 120V model, 100W-incandescent equivalent (13W), with a 100-foot cord, sized for most Hayward, Pentair, and Jandy spa niches.
Key Features
- Bright cool white: High-output Cool White LEDs equivalent to a 100W incandescent spa lamp.
- Up to 90% energy savings versus incandescent, rated for up to 50,000 hours.
- Zero-pixilation lens for smooth, even illumination.
- Universal niche fit: Fits most Hayward, Pentair, and Jandy spa niches.
- Rugged construction: Heavy-duty 316L stainless steel, encapsulated housing, Guardian silicone lens gasket.
- 3-year limited warranty; ETL-listed for pool use.
Specifications
- Part Number: 21101 (model LPL-S1W-120-100-P)
- Type: PureWhite LED spa light
- Voltage: 120V
- Wattage: 13W (100W incandescent equivalent), Cool White
- Cord Length: 100 feet
- Brand: J&J Electronics (Hayward)
Frequently Asked Questions
Is the J&J 21101 for a pool or a spa?
This is the spa model, sized for spa niches. For a pool white light, see the 21075.
Is it a color or white light?
It's a white-only PureWhite fixture (Cool White). For color, see the ColorSplash XG-W spa lights.
What niches does it fit?
It fits most Hayward, Pentair, and Jandy spa niches.
How bright is it?
The S1W series is a 100-watt incandescent equivalent (13W actual), producing about 500 lumens.
Is professional installation required?
Installation by a qualified pool professional or electrician is recommended and may be required to validate warranty. Always disconnect power before servicing.
Frequently asked questions
Can I replace an incandescent pool light with an LED?
In most cases yes, and it is the common upgrade path, but the niche size, cord length and voltage must all match. LED fixtures draw far less power and last considerably longer than the incandescent lamps they replace.
What is the part number for this pool light?
J&J Electronics lists this pool light under part number 21101. Quote 21101 when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
How long a cord do I need?
The cord has to reach from the niche all the way to the junction box with slack for servicing - installers normally leave enough to lift the fixture onto the deck. Cord length is fixed at the factory, so measure before ordering rather than after.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your J&J Electronics equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
Does pool light work need an electrician?
Pool lighting sits under specific electrical code requirements covering bonding, grounding and GFCI protection. Cut power at the breaker before removing any fixture, and have a licensed professional handle the junction box and supply side.
Is there a warranty on this pool light?
It carries the standard J&J Electronics manufacturer warranty. The terms are set by J&J Electronics, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.