J&J Electronics 23002 ColorSplash XG-WRGB+White LED Pool Light, 120V, 100' Cord
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The J&J Electronics 23002 ColorSplash® XG-W Series RGB+White LED Pool Light brings five solid colors, seven light shows, and a dedicated PureWhite® mode to your pool. This is the 120V model with a 100-foot cord, built to replace most Hayward, Pentair, and Jandy wet niches.
Key Features
- RGB + White with PureWhite mode: Five solid colors, seven light shows, plus a dedicated white circuit.
- Line-voltage 120V operation — no transformer required, with a 100-foot cord for pads farther from the niche.
- Universal niche fit: Replaces most Hayward, Pentair, and Jandy wet niches.
- Energy efficient & long-lasting: Up to 90% energy savings, rated for up to 50,000 hours.
- Rugged construction: 316 stainless rim, encapsulated housing, tempered glass zero-pixilation lens.
- 3-year manufacturer warranty through Hayward.
Specifications
- Part Number: 23002 (model LPL-F2CW-120-100-P)
- Type: ColorSplash XG-W RGB+White LED pool light
- Voltage: 120V
- Cord Length: 100 feet
- UPC: 8071542300202
- Brand: J&J Electronics (Hayward)
Frequently Asked Questions
Is the J&J 23002 a 12V or 120V light?
It's the 120-volt model and runs on line voltage with no transformer needed. The 12V equivalent with a 100' cord is the 23008.
What niches does it fit?
It replaces most Hayward, Pentair, and Jandy wet niches in gunite, vinyl, or fiberglass pools.
Is this a color or white light?
Both — RGB+White with five solid colors, seven light shows, and a dedicated PureWhite mode.
What other cord lengths are available?
The same 120V pool light comes with a 50-foot cord as the 23042 and a 150-foot cord as the 23044.
Is professional installation required?
Installation by a qualified pool professional or electrician is recommended and may be required to validate warranty. Always disconnect power before servicing.
Frequently asked questions
Can I replace an incandescent pool light with an LED?
In most cases yes, and it is the common upgrade path, but the niche size, cord length and voltage must all match. LED fixtures draw far less power and last considerably longer than the incandescent lamps they replace.
What is the part number for this pool light?
J&J Electronics lists this pool light under part number 23002. Quote 23002 when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
How long a cord do I need?
The cord has to reach from the niche all the way to the junction box with slack for servicing - installers normally leave enough to lift the fixture onto the deck. Cord length is fixed at the factory, so measure before ordering rather than after.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your J&J Electronics equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
Does pool light work need an electrician?
Pool lighting sits under specific electrical code requirements covering bonding, grounding and GFCI protection. Cut power at the breaker before removing any fixture, and have a licensed professional handle the junction box and supply side.
Is there a warranty on this pool light?
It carries the standard J&J Electronics manufacturer warranty. The terms are set by J&J Electronics, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.