J&J Electronics 23012 ColorSplash XG-WRGB+White LED Spa Light, 120V, 100' Cord
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The J&J Electronics 23012 ColorSplash® XG-W Series RGB+White LED Spa Light transforms any spa with five solid colors, seven light shows, and a dedicated PureWhite® mode. This is the 120V spa model with a 100-foot cord, sized for most Hayward, Pentair, and Jandy spa niches.
Key Features
- RGB + White with PureWhite mode: Five solid colors, seven light shows, and a dedicated white circuit.
- Spa-sized fixture with a 100-foot cord for equipment set farther away.
- Universal niche fit: Fits most Hayward, Pentair, and Jandy spa niches.
- Energy efficient & long-lasting: Up to 90% energy savings, rated for up to 50,000 hours.
- Rugged construction: 316 stainless rim, encapsulated housing, tempered glass zero-pixilation lens.
- 3-year manufacturer warranty through Hayward.
Specifications
- Part Number: 23012 (model LPL-S2CW-120-100-P)
- Type: ColorSplash XG-W RGB+White LED spa light
- Voltage: 120V
- Cord Length: 100 feet
- Brand: J&J Electronics (Hayward)
Frequently Asked Questions
Is the J&J 23012 for a pool or a spa?
This is the spa model. For pools, see the ColorSplash XG-W pool lights (23042 and others).
What niches does it fit?
It fits most Hayward, Pentair, and Jandy spa niches.
What voltage and cord length is the 23012?
120 volts with a 100-foot cord. The same 120V spa series is available in 50' (23011) and 150' (23013).
Is this a color or white light?
Both — RGB+White with five solid colors, seven light shows, and a dedicated PureWhite mode.
Is professional installation required?
Installation by a qualified pool professional or electrician is recommended and may be required to validate warranty. Always disconnect power before servicing.
Frequently asked questions
Can I replace an incandescent pool light with an LED?
In most cases yes, and it is the common upgrade path, but the niche size, cord length and voltage must all match. LED fixtures draw far less power and last considerably longer than the incandescent lamps they replace.
What is the part number for this pool light?
J&J Electronics lists this pool light under part number 23012. Quote 23012 when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
How long a cord do I need?
The cord has to reach from the niche all the way to the junction box with slack for servicing - installers normally leave enough to lift the fixture onto the deck. Cord length is fixed at the factory, so measure before ordering rather than after.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your J&J Electronics equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
Does pool light work need an electrician?
Pool lighting sits under specific electrical code requirements covering bonding, grounding and GFCI protection. Cut power at the breaker before removing any fixture, and have a licensed professional handle the junction box and supply side.
Is there a warranty on this pool light?
It carries the standard J&J Electronics manufacturer warranty. The terms are set by J&J Electronics, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.