Jandy 4716 Pro Series NeverLube Positive Seal Diverter Valve, 2-Port, 2" x 2.5" — Genuine OEM
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The Jandy Pro Series 4716 NeverLube Positive Seal Diverter Valve is a genuine Zodiac/Jandy 2-port valve sized 2" x 2.5". A 2-port valve acts as a reliable on/off shutoff, and the NeverLube design means it never requires lubrication — with a positive seal for leak-free operation.
Key Features
- NeverLube design: Never needs lubrication over its service life.
- 2-port shutoff: Simple, reliable on/off flow control for 2" to 2.5" plumbing.
- Positive seal: Tight, leak-free sealing.
- Durable construction with a smooth 180° handle throw.
- Serviceable: Rebuildable with standard Jandy NeverLube kits.
- CPVC models carry a lifetime warranty on the pool where originally installed.
Specifications
- Part Number: 4716
- Type: NeverLube positive seal diverter valve, 2-port
- Size: 2" x 2.5"
- Brand: Jandy Pro Series (Zodiac) — genuine OEM
Frequently Asked Questions
What size and configuration is the Jandy 4716?
It's a 2-port NeverLube valve sized 2" x 2.5". The 3-port version at this size is the 4717.
What's the difference between a 2-port and 3-port valve?
A 2-port valve is an on/off shutoff for a single line. A 3-port diverter directs flow between two destinations. Choose 2-port (4716) for isolation/shutoff.
What does "NeverLube" mean?
It never requires lubrication, unlike older valves that needed periodic greasing.
Can it be rebuilt?
Yes — serviceable with standard Jandy NeverLube diverter and o-ring kits.
Is it genuine Jandy?
Yes — a genuine Jandy Pro Series (Zodiac) OEM valve.
Frequently asked questions
How do I know which O-ring or gasket size I need?
Seals are specified by inside diameter and cross-section thickness, not by the equipment they sit in. Measure the old seal, or use the part number from your equipment's parts diagram, since visually similar rings are frequently a size apart.
What is the part number for this seal?
Pro Series lists this seal under part number 4716. Quote 4716 when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
Should I lubricate the seal on installation?
Yes - a thin film of silicone-based pool lubricant helps the seal seat evenly and makes the next service far easier. Do not use petroleum-based grease, which swells and degrades most elastomers used in pool equipment.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your Pro Series equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
How often do pool seals need replacing?
Seals are consumables. Replace them whenever the component is opened, and sooner if you see flattening, cracking, a chalky surface or any weeping. A failed seal on the suction side draws air and can make a pump lose prime.
Is there a warranty on this seal?
It carries the standard Pro Series manufacturer warranty. The terms are set by Pro Series, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.