Jandy Levolor II K2300CKC Dual-Fill Electronic Water Leveler — 2 Sensors 100 ft & 2 x 1" Valves, 110/220V — Genuine OEM
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The Jandy Levolor II K2300CKC is a genuine OEM dual-fill electronic water leveling system. It maintains the level in two separate bodies of water — typically a pool and spa running on independent equipment — using two sensors and two solenoid valves from a single controller. When a sensor detects low water for roughly two minutes, the controller opens that circuit's valve and fills until the level is restored.
Key Features
- Two independent fill circuits: Each body of water gets its own sensor and valve, controlled separately.
- No moving parts: Solid-state sensing means nothing to wear out or rust, unlike a mechanical float valve.
- Wave compensation: Electronics ignore surface movement and splash, so the system fills only on a genuine low-water condition.
- Time-out lock-out: Limits how long water can flow, guarding against overfilling and helping expose a hidden leak rather than masking it.
- Dual voltage: Wired 220V at the factory, field-adjustable to 110V.
- Five LED indicators: Power, Sensor I, Filling I, Sensor II and Filling II.
- Flexible placement: Sensors mount anywhere a constant level can be measured — skimmer or static pipe. No in-deck canisters or under-deck pressurised fill lines needed.
- Waterproof enclosure: Suited to equipment pads and mechanical rooms.
Specifications
- Model: K2300CKC
- Type: Dual-fill electronic water leveler (two bodies of water)
- Voltage: 220V factory wired, field-adjustable to 110V
- Sensor Cord: 100 ft (two sensors)
- Valves: Two 24 VAC 1" solenoid valves
- Kit Contains: Control box, two sensors (100 ft), two 1" solenoid valves
- Indicators: 5 LEDs — Power, Sensor I, Filling I, Sensor II, Filling II
- Listing: ETL approved
- UPC: 052337029315
- Brand: Jandy / Zodiac (Genuine OEM)
Frequently Asked Questions
How is this different from the K1100?
The K2300 fills two separate bodies of water with two sensors and two valves. The K1100 fills one, with a single sensor and valve. Choose the K2300 only if your pool and spa have independent equipment sets and both need levelling.
Do I need this if my spa spills over into the pool?
Usually not. A shared-water pool and spa behaves as one body and only needs a single-fill K1100. The K2300 is for genuinely separate bodies.
Will it overfill if the water is choppy?
No. The electronics compensate for waves and splash-out, and a lock-out timer caps fill duration on each circuit.
Can I run it on 110V?
Yes. It ships wired for 220V and is field-adjustable to 110V per the installation manual.
Who should install it?
A qualified pool professional or licensed electrician. The control box must be mounted at least five feet from the inside pool wall using non-metallic plumbing — three metres for Canadian installations.
Are both valves 1 inch?
Yes — this configuration ships with two 1" solenoid valves and two 100 ft sensors.
Frequently asked questions
Is this an original manufacturer part?
This item is listed under the manufacturer's own part number. Using the manufacturer's part keeps fit and material specification consistent with what the equipment was designed around.
What is the part number for this part?
Jandy lists this part under part number K2300CKC. Quote K2300CKC when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
What should I check before ordering?
Compare the part number and the dimensions in the specification section against the item you are replacing. If your equipment model is not named on this page, send it to us and we will confirm the fit before you buy.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your Jandy equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
How is this item packaged and shipped?
Orders ship from our warehouse. Transit time depends on the destination and the size of the item; current shipping and return terms are on our Shipping and Returns page.
Is there a warranty on this part?
It carries the standard Jandy manufacturer warranty. The terms are set by Jandy, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.