Jandy Levolor K1100CKC Electronic Water Leveler — 100 ft Sensor & 1" Valve, 110/220V — Genuine OEM
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The Jandy Levolor K1100CKC is a genuine OEM electronic water leveling system that automatically maintains the water level in a pool, spa, fountain or pond. When the sensor detects low water for roughly two minutes, the controller opens the solenoid valve and fills until the level is restored — no garden hose, no float valve, no moving parts to stick or corrode.
Key Features
- No moving parts: Solid-state sensing means nothing to wear out or rust, unlike a mechanical float valve.
- Wave compensation: Electronics ignore surface movement and splash, so the system fills only on a genuine low-water condition.
- Time-out lock-out: Limits how long water can flow, guarding against overfilling and helping expose a hidden leak rather than masking it.
- Dual voltage: Wired 220V at the factory, field-adjustable to 110V.
- Three LED indicators: Power, Sensor and Filling.
- Flexible placement: Sensor mounts anywhere a constant level can be measured — skimmer or static pipe. No in-deck canisters or under-deck pressurised fill lines needed.
- Waterproof enclosure: Suited to equipment pads and mechanical rooms.
- No structural work: Installs on new or existing pools without modifying the pool surface or shell.
Specifications
- Model: K1100CKC
- Type: Fill-only electronic water leveler (single body of water)
- Voltage: 220V factory wired, field-adjustable to 110V
- Sensor Cord: 100 ft
- Valve: One 24 VAC 1" solenoid valve
- Kit Contains: Control box, sensor (100 ft), 1" solenoid valve
- Indicators: 3 LEDs — Power, Sensor, Filling
- Listing: ETL approved
- UPC: 052337029155
- Brand: Jandy / Zodiac (Genuine OEM)
Frequently Asked Questions
How is this different from the K2300?
The K1100 fills one body of water using one sensor and one valve. The K2300 fills two separate bodies — such as a pool and spa on independent equipment — using two sensors and two valves. If you have a single pool, the K1100 is the right unit.
Will it overfill if the pool is choppy?
No. The electronics compensate for waves and splash-out, and a lock-out timer caps fill duration.
Does it need in-deck canisters or a pressurised fill line?
No. The sensor sits wherever a constant water level can be read, commonly in the skimmer or a static pipe.
Can I run it on 110V?
Yes. It ships wired for 220V and is field-adjustable to 110V per the installation manual.
Who should install it?
A qualified pool professional or licensed electrician. The control box must be mounted at least five feet from the inside pool wall using non-metallic plumbing — three metres for Canadian installations.
What sensor lengths are available?
This model ships with 100 ft. Jandy offers the K1100 with sensor cords from 50 ft up to 500 ft under different suffixes.
Frequently asked questions
How do I identify the right replacement valve?
Valves are specified by port size, port count, connection type - slip, threaded or union - and body material. Measure the pipe outside diameter rather than guessing at nominal size, since PVC sizing does not match the physical measurement.
What is the part number for this valve?
Jandy lists this valve under part number K1100CKC. Quote K1100CKC when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
Why is my valve leaking or hard to turn?
Stiff operation and weeping around the stem usually mean dried-out or chemically degraded seals. Many valve bodies can be rebuilt with a service kit rather than replaced outright, which avoids cutting into the plumbing.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your Jandy equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
Can I automate this valve?
Diverter valves in this style commonly accept a valve actuator so an automation system can switch them, but the actuator and its mounting hardware are separate items. Confirm the valve body is a type the actuator is rated to drive before ordering.
Is there a warranty on this valve?
It carries the standard Jandy manufacturer warranty. The terms are set by Jandy, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.