Genuine Jandy OEM

Jandy R0503000 Nature2 Fusion Soft Electrolytic Cell Kit with O-Ring — FSOFT1400, Up to 40,000 Gallons, Genuine OEM

SKU: R0503000
Regular price $999.00
Regular price -12% $1,140.00 Sale price $999.00
In stock - 46 items available
Usually ships within 24 hours

The Jandy R0503000 Electrolytic Cell Kit is the genuine Zodiac/Jandy replacement cell for the Nature2® Fusion Soft FSOFT1400 mineral and salt sanitizing system. It ships complete with the O-ring and is rated for pools up to 40,000 gallons. When chlorine output drops or the system reports a cell fault, this restores full sanitizing performance.

Key Features

  • Genuine Zodiac/Jandy OEM cell: Correct plate coating and electrical specification for the FSOFT1400 power pack.
  • O-ring included: Fresh seal supplied so you can install without a separate parts order.
  • Rated to 40,000 gallons: Sized for the Fusion Soft 1400 system's full capacity.
  • Restores chlorine production: New plate coating brings output back to factory levels.
  • Straightforward install: Shut off the pump, unplug the DC cord, turn the collar counterclockwise, swap the cell.
  • Protects your power pack: OEM electrical specs avoid the PCB damage that mismatched aftermarket cells can cause.

Specifications

  • Part Number: R0503000
  • Type: Electrolytic cell replacement kit
  • Capacity: Pools up to 40,000 gallons
  • Fits: Nature2 Fusion Soft FSOFT1400
  • Includes: Electrolytic cell and O-ring
  • Brand: Jandy / Zodiac — genuine OEM

Frequently Asked Questions

Which system does the R0503000 fit?

The Nature2 Fusion Soft FSOFT1400 model, for pools up to 40,000 gallons. The smaller FSOFT700 system uses a different cell (R0502800).

Does it include the O-ring?

Yes — the O-ring is included, and you should always fit the new one rather than reusing the old seal.

How do I know my cell needs replacing?

Common signs are falling chlorine output despite correct salt levels, a persistent cell warning on the controller, or visible wear on the plate coating. Before replacing, rule out a dirty cell, a loose cable connection, or low salt.

How is it installed?

Turn off the pump and close the valves, unplug the DC cord, turn the large collar counterclockwise to release the old cell, fit the new cell with its O-ring, and reconnect.

Can I use an aftermarket cell instead?

Aftermarket cells exist, but an incompatible cell can damage the power pack PCB or produce incorrect chlorine levels — and may void remaining warranty. This is the genuine OEM cell.

How long should a cell last?

Typically several seasons depending on run time and water chemistry. The plate coating wears through normal electrolysis, and aggressive or frequent acid washing shortens that life considerably.

Frequently asked questions

How many gallons is this salt system rated for?

The gallon rating is part of the model designation and is listed in the specification section above. Sizing up is normal practice: a cell rated above your pool volume runs fewer hours to hold the same chlorine level and generally lasts longer than one running at its limit.

What is the part number for this salt cell?

Nature2 lists this salt cell under part number R0503000. Quote R0503000 when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.

How long does a salt chlorinator cell last?

Cell life is measured in operating hours rather than calendar years, and most residential cells give several seasons of service. Life is shortened by high cyanuric acid, low water temperature operation, scale buildup on the plates, and running the cell at a high output percentage for long periods.

How do I confirm this fits my equipment?

Match the part number stamped on the component you are replacing, or look it up in the parts list for your Nature2 equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.

Do I need a matching power supply or control unit?

A cell and its power centre are matched as a pair; a cell will not generate chlorine on a power supply it was not designed for. Check whether this listing is the cell only, the power supply only, or a complete system before ordering.

Is there a warranty on this salt cell?

It carries the standard Nature2 manufacturer warranty. The terms are set by Nature2, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.

  • Brand: Jandy (Zodiac)
  • Model: R0503000
  • Type: Electrolytic cell kit with O-ring
  • Fits: Nature2 Fusion Soft FSOFT1400
  • Genuine Jandy (Zodiac) OEM cell — correct plate coating and electrical spec.
  • Non-OEM cells can damage the power pack PCB and may void remaining warranty.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)