Pentair 350122 IntelliFlo 50 ft Communication Cable — For IntelliFloXF, IntelliProXF, VF, VS 3050, VS+SVRS, Genuine OEM
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The Pentair 350122 Communication Cable is a genuine OEM 50 ft, 26 AWG 2-conductor cable that connects IntelliFloXF, IntelliProXF, IntelliFlo VF, IntelliFlo VS 3050, and VS+SVRS variable-speed pumps to a Pentair automation system. Its 50 ft length reaches automation panels located well away from the pump.
Key Features
- Genuine Pentair OEM: Correct 2-conductor communication cable for reliable pump-to-automation control.
- 50 ft length: Extra reach for panels mounted far from the equipment pad.
- 26 AWG 2-conductor: Carries the digital control signal between pump and automation.
- Broad IntelliFlo compatibility: IntelliFloXF, IntelliProXF, IntelliFlo VF, VS 3050, and VS+SVRS pumps.
- Enables automated control: Lets the automation system set pump speeds and schedules.
- Durable build: Constructed to hold up on the equipment pad over long runs.
Specifications
- Part Number: 350122
- Type: Communication cable (2-conductor, 26 AWG)
- Length: 50 ft
- Fits: IntelliFloXF, IntelliProXF, IntelliFlo VF, IntelliFlo VS 3050, VS+SVRS
- UPC: 788379830069
- Brand: Pentair — genuine OEM
Frequently Asked Questions
Which pumps does the Pentair 350122 work with?
IntelliFloXF, IntelliProXF, IntelliFlo VF, IntelliFlo VS 3050, and VS+SVRS variable-speed pumps. Confirm your pump model before ordering.
How is this different from the 356324Z cable?
Length and pump family. The 350122 is a 50 ft cable for the IntelliFlo VF/XF/VS 3050/SVRS pumps; the 356324Z is a 25 ft RS-485 cable for SuperFlo VS/VST and WhisperFloXF VS pumps. Match the cable to your specific pump and the distance to your panel.
How long is it?
50 feet — useful when the automation panel is a long run from the pump.
What gauge is the cable?
26 AWG, 2-conductor — the correct spec for IntelliFlo communication.
What does it do?
It carries the control signal so your Pentair automation can operate the pump's speeds and schedules instead of programming the pump manually.
Is professional installation required?
Wiring to automation is best done by a qualified pool professional. Disconnect power before connecting and route the cable away from high-voltage lines.
Frequently asked questions
Is a variable speed pump worth it?
Variable speed pumps draw dramatically less power at low speed because energy use falls far faster than flow does. Many jurisdictions now require variable speed for new and replacement residential pool pumps above a certain horsepower, so check local code before buying single-speed.
What is the part number for this pump?
Pentair lists this pump under part number 350122. Quote 350122 when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
How do I match a pump to my pool?
Work from the plumbing rather than the pool size: line diameter, total dynamic head and the flow your filter and heater can accept all cap the useful pump size. An oversized pump on undersized plumbing wastes power and can exceed the filter's rated flow.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your Pentair equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
What do I need to check before installing this pump?
Confirm the voltage, the union or port sizes and the mounting footprint against your existing installation. Pump replacement usually involves electrical connections and may require a licensed electrician depending on local requirements.
Is there a warranty on this pump?
It carries the standard Pentair manufacturer warranty. The terms are set by Pentair, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.