Pentair 356911Z IntelliFlo VS+SVRS Drive Kit with Keypad — Complete Assembly, Fits 011017 & 011057 — Genuine OEM
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The Pentair 356911Z Drive Kit is the genuine OEM complete drive assembly for IntelliFlo VS+SVRS pumps. Unlike the bare 356910Z drive, this kit ships with everything needed for a full replacement — drive, keypad, keypad cover and drive hardware.
Key Features
- Complete kit: Drive assembly (356910Z), keypad assembly (357527Z), keypad cover (400100) and drive hardware kit (355685).
- Genuine Pentair OEM: Correct drive for the VS+SVRS platform, with the SVRS safety functionality intact.
- Built-in LCD keypad: Restores full programming and monitoring at the pump.
- Fits both VS+SVRS generations: The original 011017 and the post-June-2016 011057.
- One-part repair: No need to source the keypad and hardware separately.
Specifications
- Part Number: 356911Z
- Type: Complete variable speed drive kit
- Fits: Pentair IntelliFlo VS+SVRS pumps — 011017 and 011057
- Kit Contains: Drive 356910Z, keypad 357527Z, keypad cover 400100, hardware kit 355685
- Colour: Almond
- Drive-Only Alternative: 356910Z
- Brand: Pentair (Genuine OEM)
Frequently Asked Questions
How is this different from the 356910Z?
The 356910Z is the drive on its own. This kit contains that same drive plus the keypad, keypad cover and drive hardware — which is what most failed-drive replacements need.
Which pumps does it fit?
IntelliFlo VS+SVRS models 011017 and 011057 only. Standard IntelliFlo VS, i1, i2 and 2VST pumps use the 356879Z kit instead.
Which one should I order?
If your keypad and hardware are intact and only the drive has failed, the 356910Z is enough. If the keypad display is faded or dead, or you are unsure, this complete kit is the safer choice — the keypad is not sold as a separate component of the drive.
What is SVRS?
Safety Vacuum Release System — it detects a suction blockage and shuts the pump down. Use only the correct SVRS drive on an SVRS pump.
Who should install it?
A qualified pool service professional. Electrical work should be carried out by a licensed electrician. Verify pump model and voltage before ordering.
Frequently asked questions
Is a variable speed pump worth it?
Variable speed pumps draw dramatically less power at low speed because energy use falls far faster than flow does. Many jurisdictions now require variable speed for new and replacement residential pool pumps above a certain horsepower, so check local code before buying single-speed.
What is the part number for this pump?
Pentair lists this pump under part number 356911Z. Quote 356911Z when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
How do I match a pump to my pool?
Work from the plumbing rather than the pool size: line diameter, total dynamic head and the flow your filter and heater can accept all cap the useful pump size. An oversized pump on undersized plumbing wastes power and can exceed the filter's rated flow.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your Pentair equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
What do I need to check before installing this pump?
Confirm the voltage, the union or port sizes and the mounting footprint against your existing installation. Pump replacement usually involves electrical connections and may require a licensed electrician depending on local requirements.
Is there a warranty on this pump?
It carries the standard Pentair manufacturer warranty. The terms are set by Pentair, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.