Pentair 620430 MicroBrite White LED Pool & Spa Light, 150' Cord, 12V 14W — Genuine OEM
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The Pentair 620430 MicroBrite® White LED Pool & Spa Light with a 150-foot cord delivers bright, pure white illumination from an ultra-compact underwater LED — with the longest cord in the MicroBrite white lineup for pools and equipment pads that need extra reach. At just 3.5 inches long, it installs in any standard 1.5-inch pool wall fitting with no niche required.
Key Features
- Longest reach: 150-foot cord for large pools or equipment located far from the light.
- Bright white illumination: Clean, uniform white light with no shadows or hot spots.
- Ultra-compact: Only 3.5" long — fits narrow walls and tight spaces.
- No niche required: Installs in any standard 1.5" pool wall fitting for fast professional installation.
- Automation-ready: Compatible with any Pentair automation system.
- Long-lasting & efficient: 12V, 14W LED with up to 10x the life of incandescent lighting.
- Salt-friendly: UL Listed for fresh water up to 6,000 ppm salinity.
Specifications
- Part Number: 620430 (EC-620430)
- Type: MicroBrite White LED pool/spa light
- Cord Length: 150 feet
- Voltage / Wattage: 12V / 14W
- Fitting: Standard 1.5" wall fitting, no niche required
- Brand: Pentair — genuine OEM product
Frequently Asked Questions
Is the Pentair 620430 a color or white light?
It's a white-only LED light with a 150-foot cord. For color-changing effects, choose the MicroBrite Color model (620424 and other cord lengths).
Why choose the 150-foot cord?
The longer cord suits larger pools or installations where the transformer/equipment pad sits farther from the light. Shorter runs are available as the 620428 (50') and 620429 (100').
Does it need a niche?
No — its 3.5-inch body installs directly in any standard 1.5-inch pool wall fitting, ideal for retrofits and tight spaces.
Can it be used in a saltwater pool?
Yes. It's UL Listed for fresh water with up to 6,000 ppm salinity, covering typical residential salt pools.
Is professional installation required?
Professional installation by a qualified pool technician or electrician is recommended and may be required to validate warranty. Always disconnect power before servicing.
Frequently asked questions
Can I replace an incandescent pool light with an LED?
In most cases yes, and it is the common upgrade path, but the niche size, cord length and voltage must all match. LED fixtures draw far less power and last considerably longer than the incandescent lamps they replace.
What is the part number for this pool light?
Pentair lists this pool light under part number 620430. Quote 620430 when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
How long a cord do I need?
The cord has to reach from the niche all the way to the junction box with slack for servicing - installers normally leave enough to lift the fixture onto the deck. Cord length is fixed at the factory, so measure before ordering rather than after.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your Pentair equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
Does pool light work need an electrician?
Pool lighting sits under specific electrical code requirements covering bonding, grounding and GFCI protection. Cut power at the breaker before removing any fixture, and have a licensed professional handle the junction box and supply side.
Is there a warranty on this pool light?
It carries the standard Pentair manufacturer warranty. The terms are set by Pentair, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.