Pentair Seal Plate O-Ring U9-373Z – Reliable Replacement Seal for Pool Pumps & Filters
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The Pentair Seal Plate O‑Ring U9‑373Z is a genuine OEM replacement seal designed to provide a secure, leak‑resistant seal between the seal plate and pump housing in compatible pool pumps and filter systems. Proper sealing is critical to maintain optimum hydraulic performance, prevent water loss, and protect internal components from damage caused by leaks or pressure fluctuations.
Constructed from high‑quality, chemical‑resistant elastomer, this O‑ring withstands exposure to pool water, sanitizers, and varying temperatures without cracking, swelling, or deteriorating. It’s ideal for maintenance, service, or pump rebuild projects where precise sealing is needed to keep your pool equipment running efficiently and quietly.
Pentair Seal Plate O‑Ring U9‑373Z Compatibility
-
Designed for pool pumps and filters that specify Pentair part U9‑373Z
-
Compatible with select WhisperFlo®, SuperFlo®, and other Pentair pump models
-
Suited for cartridge and multi‑port filter systems requiring this seal size
-
Works in residential and commercial pool installations needing reliable sealing
Frequently asked questions
How do I know which O-ring or gasket size I need?
Seals are specified by inside diameter and cross-section thickness, not by the equipment they sit in. Measure the old seal, or use the part number from your equipment's parts diagram, since visually similar rings are frequently a size apart.
What is the part number for this seal?
Pentair lists this seal under part number U9-373Z. Quote U9-373Z when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
Should I lubricate the seal on installation?
Yes - a thin film of silicone-based pool lubricant helps the seal seat evenly and makes the next service far easier. Do not use petroleum-based grease, which swells and degrades most elastomers used in pool equipment.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your Pentair equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
How often do pool seals need replacing?
Seals are consumables. Replace them whenever the component is opened, and sooner if you see flattening, cracking, a chalky surface or any weeping. A failed seal on the suction side draws air and can make a pump lose prime.
Is there a warranty on this seal?
It carries the standard Pentair manufacturer warranty. The terms are set by Pentair, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.