Quart IPS 747 Blue Pool/Spa Cement 10852 Glue Blue Pool R Spa Quart | 10852
Couldn't load pickup availability
Got questions?
Feel free to get in touch
The IPS 747 Blu Pool/Spa Cement (10852) is a high‑strength PVC solvent cement designed specifically for pool and spa plumbing applications. This quart‑size adhesive creates a fast‑curing, permanent, watertight bond between PVC pipes and fittings, ensuring reliable long‑term performance for suction lines, return lines, valves, drains, and other plumbing fixtures.
The blue‑tinted formula makes it easy to visually verify proper application and coverage during installation. Formulated to resist chlorine, chemicals, and environmental exposure, this cement is a trusted choice for professional plumbers and DIY installers alike.
IPS 747 Blu Pool/Spa Cement (10852) Compatibility
-
Works with PVC pipe and fittings commonly used in pool and spa systems.
-
Suitable for Schedule 40 and Schedule 80 PVC applications.
-
Ideal for suction and return lines, valve connections, skimmers, drains, and other plumbing joints.
-
Compatible with IPS brand and most major PVC pool plumbing products.
-
Appropriate for inground and above‑ground pools and spa installations.
Frequently asked questions
How do I confirm the size of this fitting?
PVC is sized by nominal pipe size, which does not match the physical measurement - 2 inch pipe measures about 2.375 inches across the outside. Measure the outside diameter of your pipe and compare it with the specification above rather than measuring the inside.
What is the part number for this fitting?
Bond lists this fitting under part number 10852. Quote 10852 when you cross-reference against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
What is the difference between slip and threaded connections?
Slip connections are solvent welded with primer and cement to make a permanent joint. Threaded connections use tape or sealant and can be taken apart later, which is why they are used where equipment may need to be removed for service.
How do I confirm this fits my equipment?
Match the part number stamped on the component you are replacing, or look it up in the parts list for your Bond equipment. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
Is Schedule 40 or Schedule 80 right for my job?
Schedule 40 handles typical residential pool plumbing. Schedule 80 has thicker walls and a higher pressure rating and is used in commercial installations and on the discharge side of high-head systems. The two share the same outside diameters, so they connect to each other.
Is there a warranty on this fitting?
It carries the standard Bond manufacturer warranty. The terms are set by Bond, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.