Sta-Rite 023035 Max-E-ProXF VS Commercial Variable Speed Pool Pump — 5 HP, Single or Three Phase, NSF/ANSI 50 — Genuine OEM

SKU: 023035
Regular price $3,999.00
Only 3 left
Low inventory - Hurry up!

Not sure this is the right fit? Ask a pool pro

The Sta-Rite 023035 Max-E-ProXF VS is a 5 HP self-priming commercial variable speed pool pump. The motor and variable frequency drive are a single integrated assembly with an onboard keypad, so there is no separate drive enclosure to mount or wire. It is built for continuous duty on apartment, hotel, HMAC and large residential circulation systems.

⚠️ Not Interchangeable with the WhisperFloXF VS (022035)

These two pumps look alike, share a drive platform, carry the same 5 HP rating and sit within a couple of hundred dollars of each other — and they are not substitutes. Pentair assigns them different parts almost all the way down:

  • Wet end assembly: 401000 here, 400000 on the WhisperFloXF
  • VS drive kit: 358086 here, 358085 on the WhisperFloXF
  • Seal plate, motor base, strainer lid and drain plug also differ

If you are replacing an existing pump, match the pump body you already have, not the horsepower. A Max-E-ProXF body takes 023035. A WhisperFloXF body takes 022035.

One Part Number Covers Every Voltage

There is no separate single-phase or three-phase SKU and no field conversion kit. The same pump wires for:

  • Single phase: 208-230 V at 20-21 A, or 277-460 V at 17-11 A
  • Three phase: 208-460 V at 13-6 A

Three phase roughly halves the current draw, which matters on a commercial pad feeding several pumps. A site with no three-phase service can still run it single phase, but it needs a dedicated circuit sized for 20-21 A plus NEC derating.

NSF/ANSI 50 Certified

Pentair states this pump "has been independently tested and Certified to UL 1081, CSA C22.2 No. 108 and NSF/ANSI 50." NSF/ANSI 50 is the listing most state and county health departments require for equipment on a public or commercial pool — it is usually the first thing an inspector asks for, and the main reason to specify this pump over a residential model.

Speed Control

Four programmable speeds anywhere between 300 and 3450 RPM, shipped preset at 1720, 2500, 3000 and 3450 (Quick Clean). Running long hours at low speed rather than short bursts at full speed is where the energy saving comes from on a commercial circulation load.

Can I Use It on a Residential Pool?

Yes. Nothing in Pentair's documentation restricts it to commercial installations, and for a very large residential pool it is a legitimate choice. Note that California's Title 20 restriction on pumps of 1 THP and above applies to single speed pumps; because this one is variable speed, that restriction does not bar it. The practical considerations are electrical service and the cost of a commercial-grade pump against a residential one.

Key Features

  • One SKU, every voltage: single or three phase without a separate part number.
  • NSF/ANSI 50 certified: accepted for public and commercial pool equipment.
  • 300 to 3450 RPM: four programmable speeds with factory presets.
  • Max-E-ProXF footprint: the variable speed upgrade for a pad already on single-speed Max-E-ProXF pumps.
  • TEFC NEMA 56 frame: totally enclosed fan-cooled, 300-series stainless shaft, double-sealed stainless bearings.
  • 2.5 in unions, adaptable to 3 in: suits most commercial plumbing without reworking the pad.

Specifications

  • Part Number: 023035
  • Product: Max-E-ProXF VS Commercial Variable Speed Pump
  • Brand: Sta-Rite (Pentair)
  • Horsepower: 5 HP, 5.0 THP, WEF 5.0
  • Voltage, single phase: 208-230 / 277-460 V
  • Voltage, three phase: 208-460 V
  • Full load amps: 20-21 A single phase at 208-230 V; 13-6 A three phase
  • Frequency: 50/60 Hz
  • Speed Range: 300-3450 RPM, four programmable
  • Factory Presets: 1720, 2500, 3000, 3450 RPM
  • Ports: 2.5 in unions, adaptable to 3 in
  • Max Continuous Pressure: 42 psi
  • Max Water Temperature: 104 F (40 C)
  • Max Ambient Temperature: 122 F (50 C)
  • Motor: NEMA 56 frame, totally enclosed fan-cooled
  • Certifications: UL 1081, CSA C22.2 No. 108, NSF/ANSI 50
  • Shipping Weight: 95 lb
  • Wet End Assembly: 401000
  • VS Drive Kit: 358086

Installation Requirements

Pentair's manual is explicit that "this unit must be connected only to a supply circuit that is protected by a ground-fault circuit-interrupter (GFCI)" and that the pump "should be installed and serviced only by a qualified pool service professional."

Bonding requires a solid copper conductor no smaller than 8 AWG (6 AWG or larger in Canada). Pentair does not publish a wire or breaker table, directing instead to the National Electrical Code and local codes — circuit sizing is your electrician's call from the full load amps above. One field note worth passing to the installer: the factory-installed surge jumper between the bottom screw terminals must stay in place, as it protects the drive components. A commercial installation will also be subject to local health department permitting.

Frequently Asked Questions

How is this different from the WhisperFloXF VS 022035?

Different pump body. Same horsepower, same drive platform, same voltage options, but a different wet end (401000 versus 400000), drive kit (358086 versus 358085), seal plate, motor base and strainer lid. They are not interchangeable. Match the body you are replacing.

Do I need three phase power?

No. The same pump runs single phase at 208-230 V or 277-460 V. Three phase is an option that cuts current draw from 20-21 A to 13-6 A, which helps on a pad running several pumps, but it is not required.

Will it pass a health inspection?

It is certified to NSF/ANSI 50, which is the standard most health departments require for public pool equipment. Confirm your specific jurisdiction's requirements, since local rules vary.

Can I put this on a residential pool?

Yes. It is a commercial-grade pump but nothing restricts it to commercial use, and it is a reasonable choice for a very large residential pool. Being variable speed, it is also unaffected by California's Title 20 restriction on single-speed pumps of 1 THP and above.

Will it fit where my single-speed Max-E-ProXF sits?

It shares the Max-E-ProXF footprint, which is why it is the usual variable speed upgrade for that family. Confirm your plumbing and pad layout before ordering, and have your installer check union alignment.

What flow does it deliver?

Pentair publishes a performance curve rather than a table. Reading the curve, it reaches roughly 260 GPM near 90 ft of total dynamic head at 3450 RPM, and around 140 GPM at 20 ft at 1720 RPM. Ask us for the curve if you need to size against a specific filter and plumbing run.

Is the pump ENERGY STAR certified?

No. ENERGY STAR's pool pump program covers residential pumps, and commercial pumps like this one are outside it. Pentair lists UL 1081, CSA C22.2 No. 108 and NSF/ANSI 50 for this model.

Frequently asked questions

What is the part number for this pump?

Pentair lists this pump under part number 023035. Quote 023035 when you cross-reference it against your equipment manual, an existing pump, or a parts diagram, so you are comparing the same model — the neighbouring 022035 is a different pump.

How do I confirm this fits my equipment?

Match the pump body you are replacing rather than the horsepower, and check your available voltage, phase and circuit capacity. If you are unsure whether your pad runs a Max-E-ProXF or a WhisperFloXF body, send us a photo of the existing pump before ordering and we will confirm.

Does commercial pump work need an electrician?

Yes. This pump requires GFCI protection and bonding to code, draws up to 21 A single phase, and a commercial installation is usually subject to health department permitting. Cut power at the service before any work and have a licensed professional handle the supply side.

Is there a warranty on this pump?

Pentair publishes a two year warranty on this pump. Separately, Pentair's warranty policy states that products purchased from the internet, including Authorized Pentair Online Resellers, receive a one year parts-only warranty from the date of purchase, and full coverage depends on proof of professional installation. Review Pentair's current terms before purchasing and keep your receipt, packaging and installation paperwork.

California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Model/SKU: 023035
  • Product: Max-E-ProXF VS Commercial Variable Speed Pump
  • Brand: Sta-Rite (Pentair)
  • Horsepower: 5 HP (5.0 THP, WEF 5.0)
  • Voltage, Single Phase: 208-230 / 277-460 V
  • Voltage, Three Phase: 208-460 V
  • Full Load Amps, Single Phase: 20-21 A at 208-230V, 17-11 A at 277-460V
  • Full Load Amps, Three Phase: 13-6 A at 208-460V
  • Frequency: 50/60 Hz
  • Speed Range: 300-3450 RPM, four programmable speeds
  • Factory Presets: 1720, 2500, 3000, 3450 RPM
  • Suction Port: 2.5 in union, adaptable to 3 in
  • Discharge Port: 2.5 in union, adaptable to 3 in
  • Drain Plug: 1/4 in NPT thermoplastic
  • Max Continuous Pressure: 42 psi
  • Max Water Temperature: 104 F (40 C)
  • Max Ambient Temperature: 122 F (50 C)
  • Motor Frame: NEMA 56, totally enclosed fan-cooled (TEFC)
  • Shaft: 300-series stainless steel
  • Certifications: UL 1081, CSA C22.2 No. 108, NSF/ANSI 50
  • Shipping Weight: 95 lb
  • Wet End Assembly: 401000
  • VS Drive Kit: 358086
  • Not Interchangeable With: 022035 WhisperFloXF VS
  • Pentair publishes a 2-year warranty on this pump. Pentair's warranty policy separately states that products purchased from the internet, including Authorized Pentair Online Resellers, receive a one-year parts-only warranty from the date of purchase. Full coverage depends on proof of professional installation. Review Pentair's current terms before purchasing.
  • TradeGrade product. Pentair states TradeGrade products are intended to be exclusive to retail stores, pool builders or pool service companies.
  • GFCI protection required. Pentair's manual states this unit must be connected only to a supply circuit protected by a ground-fault circuit-interrupter.
  • Qualified professional installation. Pentair's manual states this pump should be installed and serviced only by a qualified pool service professional.
  • California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. See www.P65Warnings.ca.gov.